Rosen-entertainment-systems UN7000 User Manual download pdf (Page 7)

UN7000 7” Widescreen Universal Monitor Page 7

Turning On and Off the Monitor

To turn on the monitor:

• Press and release the POWER button on the monitor or the

remote control.

To turn off the monitor:

• Press and hold the POWER button on the monitor or the

remote control.

Changing Video Inputs

The monitor can be used with either NTSC or PAL video signals.

NTSC is the North American video standard and is compatible with

all Rosen video sources.

To change the active video input:

1. Press the POWER button to turn on the monitor.

2. Press MENU on the monitor or MENU on the remote control.

The following screen appears in the monitor.

AV1 : NTSC

MODE

“AV1” appears briefly when AV1 is the active input.

“AV2” appears briefly when AV2 is the active input.

3. Press  or  to toggle between NTSC or PAL.

4. Press POWER on the monitor, or MODE on the remote

control to toggle between “AV1” and “AV2.”

5. Press MENU on the monitor, or MENU on the remote control

again, to exit the menu.

Operating Guide

UN7000 7” Widescreen Universal Monitor Page 10

Reset All Settings

The Reset menu option enables you to restore all settings to their

original factory values.

To reset all settings:

1. Press Menu on the monitor or Monitor Menu on the remote

control. The OSD menu appears.

2. Press Menu on the monitor or Monitor Menu on the remote

control until the arrow points to “Reset.”

3. Press  or to return all settings to factory defaults.

4. Press Menu on the monitor or Monitor Menu on the remote

control again to exit the menu. The menu disappears after 5

seconds if no buttons are pressed.

Operating Guide

1 2 3 4 5 6 7 8

No comments

Rosen-entertainment-systems UN7000 User Manual Page 7